Roof Guard
The Roof Paint That INSULATES.
Roof Guard is a bright white high build elastomeric roof coating based on the latest chemical technology and fortified with Hy-Tech insulating ceramic microspheres. This bright white high build formula is designed to insulate, seal, waterproof, soundproof and protect.
The thick rubber-like ceramic reinforced shield expands and contracts with varying hot and cold temperatures plus resists thermal shock. Roof Guard offers superior mildew resistance, soundproofing, UV ray reflectivity, corrosion resistance and a beautiful insulating finish.
When applied according to Hy-Tech specifications Roof Guard provides an inexpensive solution to re-roofing providing many years of durable protection and outstanding beauty.
USES:
Roof Guard is recommended for Sloped OR Flat Roof surfaces. Excellent adhesion to weathered wood, shakes, plywood, primed metal, galvanized, aluminum, tin, copper, asbestos, asphalt, urethane, polyester, styrofoam, built up roof, tar and gravel, rolled roofing, concrete, clay and masonry tiles.
Two coats of Roof Guard are required and it may be applied by brush, roller or spray with a minimum tip size of .030 and all filters removed from spray equipment.
Surface Preparation: A prime coat of
#1220 Bond-It is required prior to application of Roof Guard to guarantee adhesion.
Only one coat of primer is necessary, so you will need less than the amount of roof coating. A typical 1200 sq. ft. roof would require 6 gallons of Bond-It and 24 gallons of Roof Guard. This is an example, and your actual requirements will vary based on the surface you are coating, and the product being used.